Finally, you have all the pieces! Go to make a new part, but after clicking New, select the Assembly option. Under the yellow box, click browse and select the table file. Click the workspace to pla...
Posted 2:22pm 7/16/17
Today, we'll make the monitors. To start, we need the stands. Based on our table, they have footprints of 8x6, so start off with a 8 x 6 x 1/32 box in a new part. Then, add a 3x2 rectangle centered...
Posted 7:32pm 7/13/17
We made our table in the last post, so now we'll begin working on our keyboard. It will have a fairly simple design, with 3 grids of keys for the primarytyping section, the number pad, and the Func...
Posted 5:13pm 7/12/17
Now that you're in a part file, we need to create something. What you see is your toolbar at the top, a summary of your part on the right, and a your original menu at the very top. There's also a f...
Posted 2:49pm 7/11/17
Posted 11:08am 7/11/17
To start, we need to familiarize ourselves with the landscape. For the purposes of this series, we'll be using Solidworks 2017. Other versions can be used and most information will remain consisten...
Posted 2:17pm 7/1/17
